+- Discovery Gaming Community (https://discoverygc.com/forums)
+-- Forum: Welcome (https://discoverygc.com/forums/forumdisplay.php?fid=399)
+--- Forum: Help & Support (https://discoverygc.com/forums/forumdisplay.php?fid=26)
+--- Thread: any idea how to start? (/showthread.php?tid=16628)
any idea how to start? - socioclast - 02-18-2009
i have WinXP. no anti virus, win firewalls are down. i was trying to modify my router settings but apparently those settings dont exist on my router. see above link for details
any idea how to start? - joshua - 02-18-2009
It didn't work for me either, i couldn't just get on freelancer and load up the mod. I had to go into my freelancer documents and after searching, i found a Discovery RP server shortcut, when i click, it appears in the list, if i don't, then i can't go. Try looking for that.
any idea how to start? - socioclast - 02-18-2009
i tried those shortcuts, as it says in tutorials. custom made or not, nothing showed up in the server list.
any idea how to start? - Beiowolf0615 - 02-18-2009
' Wrote:i tried setting up fl server in my router managment, as it says on this page:
http://portforward.com/english/routers/por...ncer_Server.htm
problem is at the end of the page. i dont have 'NAT -Virtual servers' option at all.
any alternative?
For what I konw, you should try the 'security' or 'routing' , becuase 'NAT -Virtual servers' is to set up a 'virtual' server, not about the rules which decides what protocol your computer can/can't access with.
Well, how about you post which model of your router is here, I'll try to find out something which could solve your problem.
After all, I know nothing about the system or hardware you're using. I could make guesses, but won't help much.
And if it's ok, can you post a picture of what's showing up after you logged into your router?
(It seems that you already know how to log into your router, so I'll past this part.)
any idea how to start? - johnpeter - 02-18-2009
I had this problem not exactly sure how to fix it, but try GL workaround 1.0
any idea how to start? - socioclast - 02-18-2009
i tried GL workaround 1.0 and nothing happens.
router is Kasda KD318-MUI
ask if you need to know anything else
any idea how to start? - Beiowolf0615 - 02-18-2009
' Wrote:i tried GL workaround 1.0 and nothing happens.
router is Kasda KD318-MUI
ask if you need to know anything else
I've do some research for you.
It appears that your router's firmware is either an older version or been updated. So you find it different from PortForward.com's solution.
Here's somthing what I found for you:
A.
1. Read your manual Section 5.4, setting your KD318MUI as a ROUTER which it works as a BRIDGE now.
2. If your manual is nowhere to found. check here.
3. After all is done. Try out FL-DISCO with the shortcut that given by DISCO-Mod.
4. If still not work. Log into your router again check out if the NAT thing shows up.
4. Check This thread as a referance.
B.
1. Visit this page . It's another model of the same company.
2. Try to find NAT setting page in your router's interface, I guess it most likely could be found in the Quality of Service.
3. If NAT found, try to set up the rules referring to PortForward,com.
C.(when option A&B both fails...)
1. Go to the shop where you bought your ADSL2+ or any Computer Electronics shop ask for help.
2. Get another router........:lol:
That's all I can do for you...Good luck pal.
Hope can see you in space.
any idea how to start? - Zelot - 02-18-2009
' Wrote:Interesting... I'm running AVG anti-virus and I've had no trouble at all...
Well arent you freaking speacial. Maybe you just havent gotten the new update. Ever thought of that?:P
any idea how to start? - socioclast - 02-18-2009
i did what you told me and i did find NAT. thats the good thing.
[attachmentid=5520]
the bad thing is - nothing changes, no servers..
i guess its time for option C.
thx for all your help.
any idea how to start? - Beiowolf0615 - 02-18-2009
There's something you did wrong about setting..
The server ip you filled in was wrong.
Normally, IPs like 192.168.xxx.xxx is for LAN use only, which assigned to each PC within the LAN of your router.
You should put FL-DISCO IP address instead, which is 82.113.48.5.
If not, THEN you try option C...