Discovery Gaming Community
Need transmission headers(60M+) for my QCP - Printable Version

+- Discovery Gaming Community (https://discoverygc.com/forums)
+-- Forum: The Community (https://discoverygc.com/forums/forumdisplay.php?fid=4)
+--- Forum: Media Center (https://discoverygc.com/forums/forumdisplay.php?fid=18)
+--- Thread: Need transmission headers(60M+) for my QCP (/showthread.php?tid=87970)

Pages: 1 2 3 4

RE: Need a QCP signature template (200M+)| Need transmission headers(60M+) - Makc_RU - 10-22-2012

ok, will do.

RE: Need a QCP signature template (200M+)| Need transmission headers(60M+) - Makc_RU - 10-22-2012

Project preview:

[Image: projectpreviewk.jpg]


RE: Need a QCP signature template (200M+)| Need transmission headers(60M+) - Dart - 10-23-2012

Try something more star spherie. and maybe replace that pelican with a heron. This sig looks to happy and too corporate like the USI sig, which is not proper for this one IMO. edit: this applies to the concept button in the 3rd example.

the signature should have a menacing feel to it (like the logo itself), I just don't feel the vibe here. red and black instead of white and blue might work better.

I'm pretty sure I'm going to be a nitpick about this until its the way i want it, so i'll make sure you get a generous enough tip even if i end up not taking you up on this at all.

(also, snubs should be a bit smaller just to give perspective for the larger ships.)

edit: i like how you handled the banner btw.

2nd edit: i edited the OP, I think the character profile is too much a distraction for now, as it is really secondary to the sig (it can stay in the template, but i'd like something that can easily look good with 2d studd like this; http://i.imgur.com/I1slQ.jpg )

RE: Need a QCP signature template (200M+)| Need transmission headers(60M+) - Makc_RU - 10-23-2012

Ver 2
[Image: projectpreview2.jpg]

Ver 2- darker
[Image: projectpreview2dark.jpg]


RE: Need a QCP signature template (200M+)| Need transmission headers(60M+) - Dart - 10-23-2012

(10-23-2012, 02:23 PM)Makc_RU Wrote: Ver 2
[Image: projectpreview2.jpg]

Ver 2- darker
[Image: projectpreview2dark.jpg]

this is a massive improvement from the first!

Can you try making these variations: all of them as seperate experiments
  • the QCP logo takes up the hole space in its section: (here you left a little open space)
  • Instead of the Queen's Privateers, type, Queen Carina's Privateers
  • shire instead of train please
  • a more menacing font

  • it looks like you removed colors altogether, I dont think the sig needs to look like that, If you can somehow make a colorized background that can look good, while not being corporate, that would definitly be a boon

again, all of these points in a separate image as you have been doing thus far, sorry for the trouble Tongue


as a side note, aside from the 430 million (extra 30 is for the trouble thus far), how much would you charge for the psd/xcf file?

RE: Need a QCP signature template (200M+)| Need transmission headers(60M+) - Makc_RU - 10-23-2012

i will just give it to you

- do you like the BG i made? If so, I can colorize it.
- will post the variations later on today.

RE: Need a QCP signature template (200M+)| Need transmission headers(60M+) - Dart - 10-23-2012

(10-23-2012, 05:55 PM)Makc_RU Wrote: i will just give it to you

- do you like the BG i made? If so, I can colorize it.
- will post the variations later on today.

its hard to make a judgement, right now, make preview without either train (colorized)

RE: Need a QCP signature template (200M+)| Need transmission headers(60M+) - Makc_RU - 10-23-2012

Ver 2: modifications


Colored BG, no ship
[Image: dartgenericcolorbg.jpg]

Different Font
[Image: dartgenericdifffont.jpg]

Full sized logo
[Image: dartgenericfulllogo.jpg]

Shire
[Image: dartgenericshire.jpg]

Full blown ver 3 - looking sexy
[Image: dartgenericshirechattxt.jpg]


RE: Need a QCP signature template (200M+)| Need transmission headers(60M+) - Dart - 10-23-2012

last two look wonderful, minus the "right section," but im sure you already know that

for the generic, I dont want a character profile, I hope you can get that fixed as well,

also, if you can restore color to my own char profile, that would be good as well xD

I'm curious how you will handle the buttons. But if you need extra room to increase the size of the sig, I wont restrict you to use a rectangle if you know what i mean Wink


so to reiterate
  • needs a version without a character profile
  • buttons might need new space. Expanding the sig size to accommodate room, might warrant to reshape the sig into an exotic shape, but not necessarily restricted to a particular one
  • character names, and maybe a quote should be placed where the current buttons are. maybe the other way around, but this boils down to what's easier to implement

edit: i like fonts with these kind of Q's . This is secondary however, get it only if you don't need to break a leg to find it Wink

RE: Need a QCP signature template (200M+)| Need transmission headers(60M+) - Makc_RU - 10-24-2012

Versions 4


Generic
[Image: dart_generic_v4_good.png]

Custom
[Image: dart_custom_v4_good.png]