Discovery Gaming Community
Outcast Sarissa concept 99% done - Printable Version

+- Discovery Gaming Community (https://discoverygc.com/forums)
+-- Forum: Discovery Development (https://discoverygc.com/forums/forumdisplay.php?fid=7)
+--- Forum: Discovery Developers Forum (https://discoverygc.com/forums/forumdisplay.php?fid=183)
+---- Forum: Discovery Unofficial Development (https://discoverygc.com/forums/forumdisplay.php?fid=389)
+----- Forum: Discovery Mod Content Submissions (https://discoverygc.com/forums/forumdisplay.php?fid=33)
+----- Thread: Outcast Sarissa concept 99% done (/showthread.php?tid=138617)

Pages: 1 2 3 4 5 6 7 8


RE: Outcast Sarissa concept - wanderer95 - 05-03-2016

The more I look at it the more I see RH cap


RE: Outcast Sarissa concept - Barb - 05-03-2016

Quote:This might work as a SRP vessel of some kind but otherwise it's really not Outcast-y enough. The massive stonking engine on the Ranseur is an outlier in Maltese design and really shouldn't be emulated- the rear half of the Ranseur is probably the worst part about the model, everything else about it design-wise is glorious.

As for the current Sarissa, again, the model's design works, it just needs tweaks, not a complete replacement.

You miiiiight change your mind once I finish texturing. Also, I'm having real fun making this thing, it's a good training for something else that may be needed in the future, so I wouldn't mind if it doesn't replace the current one, still looking forward to see what Swallow can do about it though.

Also this one may become a battlecruiser/carrier/something otherwise?


RE: Outcast Sarissa concept - Barb - 05-03-2016

(05-03-2016, 10:40 PM)wanderer95 Wrote: The more I look at it the more I see RH cap

Stahp, don't look Sad


RE: Outcast Sarissa concept - Cælumaresh - 05-03-2016

(05-03-2016, 10:46 PM)Barb Wrote:
(05-03-2016, 10:40 PM)wanderer95 Wrote: The more I look at it the more I see RH cap

Stahp, don't look Sad

He is right though, with proper texturing this could be a nice replacement for the Jormungand imo.
(Mandatory add Forward Gun)


RE: Outcast Sarissa concept - Barb - 05-04-2016

(05-03-2016, 11:27 PM)Caelumaresh Wrote:
(05-03-2016, 10:46 PM)Barb Wrote:
(05-03-2016, 10:40 PM)wanderer95 Wrote: The more I look at it the more I see RH cap

Stahp, don't look Sad

He is right though, with proper texturing this could be a nice replacement for the Jormungand imo.
(Mandatory add Forward Gun)

It doesn't have the Rheinland-generic engine... Though I think I can make a good Jormungand aswell (not with this model, it doesn't look anywhere close a RH ship).


RE: Outcast Sarissa concept - Zyliath - 05-04-2016

I admit, it would look nice as a SRP ship.
Might as well make my battletransport dream come true...


RE: Outcast Sarissa concept - Barb - 05-04-2016

(05-04-2016, 08:31 AM)Zyliath Wrote: I admit, it would look nice as a SRP ship.
Might as well make my battletransport dream come true...

Hmmm SRP you say.. Then I would sell the model to the one SRP'ing it.

Or I can resize it so that it becomes a BC, since its getting so popular, I dont see why OCs and Sairs doesnt deserve one


RE: Outcast Sarissa concept - Cælumaresh - 05-04-2016

(05-04-2016, 08:22 AM)Barb Wrote:
(05-03-2016, 11:27 PM)Caelumaresh Wrote:
(05-03-2016, 10:46 PM)Barb Wrote:
(05-03-2016, 10:40 PM)wanderer95 Wrote: The more I look at it the more I see RH cap

Stahp, don't look Sad

He is right though, with proper texturing this could be a nice replacement for the Jormungand imo.
(Mandatory add Forward Gun)

It doesn't have the Rheinland-generic engine... Though I think I can make a good Jormungand aswell (not with this model, it doesn't look anywhere close a RH ship).

Give me one second to gather RH gunship pic and RH BS pic and ill show you what Wanderer and I mean


EDIT 1:

Cruiser pics: http://imgur.com/a/xWHTo

EDIT 2:

GB pics: http://imgur.com/a/dbwiA


RE: Outcast Sarissa concept - Barb - 05-04-2016

(05-04-2016, 03:09 PM)Caelumaresh Wrote:
(05-04-2016, 08:22 AM)Barb Wrote:
(05-03-2016, 11:27 PM)Caelumaresh Wrote:
(05-03-2016, 10:46 PM)Barb Wrote:
(05-03-2016, 10:40 PM)wanderer95 Wrote: The more I look at it the more I see RH cap

Stahp, don't look Sad

He is right though, with proper texturing this could be a nice replacement for the Jormungand imo.
(Mandatory add Forward Gun)

It doesn't have the Rheinland-generic engine... Though I think I can make a good Jormungand aswell (not with this model, it doesn't look anywhere close a RH ship).

Give me one second to gather RH gunship pic and RH BS pic and ill show you what Wanderer and I mean


EDIT 1:

Cruiser pics: http://imgur.com/a/xWHTo

EDIT 2:

GB pics: http://imgur.com/a/dbwiA

Hmm well when I get home I will show you why I made it look the way it does, and you'll understand. Also the way Vidar is shaped, prooobably because massdriver wanted it to look like its predecessor import-model.


RE: Outcast Sarissa concept - Barb - 05-04-2016

First pic

Second pic

Third pic

Another detail I forgot is the large square part on their bellies (Sarissa and my Sarissa) which you can see from the 3D viewer.

The main reason why I made it look like a sword/spear (or accidently pretty much like the RH in shape) is because "Sarissa" was a spear used in the dark times before. I wanted it to actually look a bit like a spear/sword just like how the TridentGB looks like a real 'Trident' (note that ALL Outcast ships including their BW ships are named after medieval weapons, swords, knives or spears. So before began modeling I already had the shape in my mind, so that's where I started, also I slightly tried to make it look like the Hispania sleeper ship so that I can come up with an easier excuse as to why inRP ship designers wanted to have it that way, they were inspired.

Where I actually started with the ship was the engine of course, and because I know that Sarissa will be re-made (pretend that my model will make it to the mod), the Ranseur will stay, therefore I wanted both of the ships to have same looking engines, round cylindrical ones. Though IF I will have some free time, I can remake the engine, despite that I re-sized it 30% of its original size so that its shape can fit better with the rest of the ship.

But as I said before, it will be much better looking and much more distinctive when it's done textured.

Thanks for the critics and feedbacks tho ^^

EDIT: Note that my Sarissa used in the pictures above, is not in its original size.