Here We Go - Printable Version

Here We Go - Printable Version

+- Discovery Gaming Community (https://discoverygc.com/forums)
+-- Forum: Discovery Development (https://discoverygc.com/forums/forumdisplay.php?fid=7)
+--- Forum: Discovery Developers Forum (https://discoverygc.com/forums/forumdisplay.php?fid=183)
+---- Forum: Discovery Unofficial Development (https://discoverygc.com/forums/forumdisplay.php?fid=389)
+----- Forum: Discovery Mod Content Submissions (https://discoverygc.com/forums/forumdisplay.php?fid=33)
+----- Thread: Here We Go (/showthread.php?tid=13967)

Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

Here We Go - Eppy - 11-23-2008

I can haz actual model, yus?

[Image: OCDessieRoughOne.jpg]

READ FIRST.

As usual, this is an untextured model right now, and it's not finished, to boot; most of the details (windows, instrumentation, insignias, etc) have yet to be installed and after that it still needs to be cleaned before I break out Photoshop and start cuttin' me some hull panels, but this is the direction I was trying to go with that paper-and-pencil blueprint I showed earlier that caused all the fuss. I can haz constructive criticism and ego stroking plox?

Here We Go - Tic - 11-23-2008

There is only one word to describe it; BRILLIANT!

Try to squeze it in 4.85 if possible.

I can haz .ms3d or .cmp for itz, yus?

Here We Go - Turkish - 11-24-2008

It looks good, but its lacking details. I'd also taper the front margin inward slightly. Its a little too rectangular for my liking.

Here We Go - Tic - 11-24-2008

' Wrote:It looks good, but its lacking details. I'd also taper the front margin inward slightly. Its a little too rectangular for my liking.

It's not lacking details, all OC ships are like that. Just flat panels and a couple of intake vents.

Here We Go - Drake - 11-24-2008

Looks nice. I kinda like the rectangularness.

Here We Go - Eppy - 11-24-2008

Quote:It's not lacking details, all OC ships are like that. Just flat panels and a couple of intake vents.

Nah, Aiden's right, it is under-detailed, as I stated in the first post; hence I have now bolded it and upped the font size.:laugh:I'll definitely try it with the bow tapered more, I can see that producing a better result.

Here We Go - Turkish - 11-24-2008

' Wrote:It's not lacking details, all OC ships are like that. Just flat panels and a couple of intake vents.

No Tic, its lacking details.

Cap ships aren't like fighters, they possess a great many more small nobs, odd ends and what not. It's quite improbable for a large vessel to lack any exterior detail, what soever.

Do a clay for us eh Morgan, I'd like to see the ship in different lighting.

EDIT: You know Eppy, that's now saved in about seventeen different places on this HDD.

Here We Go - Orin - 11-24-2008

Yeah, the only view I don't like is the side profile. Tapering it might help.

The rest looks pretty spiffy.

Here We Go - Tic - 11-24-2008

From side it kinda reminds me of that Batman military jump car from last two movies..

But mayb it's just me.

Also Turkish only thing it does lack are windows. It's a warship, all components should be covered with armor plates, not stick out and create weak spots..

Here We Go - Turkish - 11-24-2008

It's impossible to cover everything in armour, there will always be an exposed section that is weaker than another. Visible or not there are exhaust points, docking ports, escape pods.

And that's just the practical side of matters, from a design and actual stylistic point you can't have everything the same. It will appear boring to the human eye, uninteresting and unattractive.