+- Discovery Gaming Community (https://discoverygc.com/forums)
+-- Forum: Welcome (https://discoverygc.com/forums/forumdisplay.php?fid=399)
+--- Forum: Help & Support (https://discoverygc.com/forums/forumdisplay.php?fid=26)
+--- Thread: Not able to connect (/showthread.php?tid=17991)
Not able to connect - DjDec - 03-17-2009
For some reason my friend cant connect.
He has McAffee security, anyone else had the same problem with McAffee?
I heard it can be annoying by not allowing connections to games
Not able to connect - johnpeter - 03-17-2009
Are there more than 195 people on? The last 5 slots are reserved for adminz.
Not able to connect - DjDec - 03-17-2009
' Wrote:Are there more than 195 people on? The last 5 slots are reserved for adminz.No 160 when he tried multiple times
and just now when there was 191 multiple times
Not able to connect - Tommeh - 03-17-2009
I have the same problem,but i don't have mcaffe,I use nod 32.
I was ok until 2 days ago.this morning it was about 70 players online and I couldn't connect.
First there is message "the operation is taking longer theh expected...."and then kicks me out.
Sometimes I managed to connect but after 5,6 minutes kicks me out.
this has become a huge problem to me because the trading is not possible in this conditions.
HELP:(
P.S.
Nod 32 is not the problem,it's checked.
I forgot to tell,I am using xp profesional sp3 windows
NOT vista.
Not able to connect - McNeo - 03-17-2009
http://discoverygc.com/forums/index.php?showtopic=9310
This should tell you all you need to know.
Not able to connect - Crossfire - 03-18-2009
Unfortunately I'm having problems as well - in Vista x64 (cue screaming now). I have looked through the above thread to no avail. I have gone through all the steps, shut off Windows Firewall, uninstalled AV software, installed and run everything as Administrator...
Freelancer starts fine and I can see the RP server listed in the multiplayer server window. However, when I attempt to connect I get the "taking longer than expected" message, and then the "cannot connect" message.
I have opened the necessary ports on my router, and even tried setting my internal IP address to DMZ, to open me up to the internet completely.
Same result.
It's got to be in the OS somewhere, but I'm at a loss. Any suggestions?
C.
Not able to connect - scallywag - 03-18-2009
' Wrote:I have the same problem,but i don't have mcaffe,I use nod 32.
I was ok until 2 days ago.this morning it was about 70 players online and I couldn't connect.
First there is message "the operation is taking longer theh expected...."and then kicks me out.
Sometimes I managed to connect but after 5,6 minutes kicks me out.
this has become a huge problem to me because the trading is not possible in this conditions.
HELP:(
P.S.
Nod 32 is not the problem,it's checked.
I forgot to tell,I am using xp profesional sp3 windows
NOT vista.
I have the same problem.
I have Windows XP
I dont have mcfee so its not that
There were only 40 players on the last time I tried and I couldnt log in...
Iv only experienced this problem with the new modd (4.85)
Not able to connect - Crossfire - 03-18-2009
I ultimately ended up booting into XP and installing everything from there. Connected without a problem. After going through all the steps and taking all the suggestions, there was still something blocking the connection.
I had already had my system set up for dual-boot, so I just got into XP, installed everything, and connected just fine.
Weird - but I got it working.
Not able to connect - Tommeh - 03-18-2009
' Wrote:I have the same problem.I had this problem also with 4.84.and I reported it to admin and in few days he said that he did some adjustments to server and that it should be fine now for me.and it was.
I have Windows XP
I dont have mcfee so its not that
There were only 40 players on the last time I tried and I couldnt log in...
Iv only experienced this problem with the new modd (4.85)
After that everything was great I connected with no problem,but then came 4.85 and the problem is back again.
Not able to connect - DjDec - 03-18-2009
' Wrote:http://discoverygc.com/forums/index.php?showtopic=9310tryed that it didnt work
This should tell you all you need to know.