Discovery Gaming Community
To:Asano Aika - Subject: Project Harukana Shiryoku - Printable Version

+- Discovery Gaming Community (https://discoverygc.com/forums)
+-- Forum: Role-Playing (https://discoverygc.com/forums/forumdisplay.php?fid=9)
+--- Forum: Communication Channel (https://discoverygc.com/forums/forumdisplay.php?fid=59)
+--- Thread: To:Asano Aika - Subject: Project Harukana Shiryoku (/showthread.php?tid=182161)



To:Asano Aika - Subject: Project Harukana Shiryoku - Soladiirn - 07-25-2020



ID: Nakai Hana
Encryption: Red Lily
Recipient: Asano Aika
CC: Yamada Mariko
Subject: Harukana Shiryoku




Konbanwa Sister Asano,

In case you have not heard, you and I have been tasked to add to the Kyori Yugami project that resulted in the Ise Jingu's Jump Drive. The Rashinban has been working hard to obtain the Bustard-class carrier that we will need to use. It seems that the equipment of the newly-named Kiyomizu Jingu will use much the same equipment, but we also need to install survery equipment in order to be able to produce accurate coordinates that the jump drives of both will use, as well as any future drive-equipped ships.

I understand that the ability to obtain accurate coordinates will also benefit your other projects. The Kiyomizu is en route to Kinkakju-ji following a brief refit in the Outcast's Valletta Shipyard for new armaments and shields.


Navigator
Nakai Hana



RE: To:Asano Aika - Subject: Project Harukana Shiryoku - Drake Averos - 08-04-2020



ID: Asano Aika
Encryption: Red Lily
Recipient: Nakai Hana
CC: Yamada Mariko
Subject: Harukana Shiryoku




Konbanwa Nakai-sama,

I got teams working on the Kiyomizu Jingu as soon as her docking clamps locked. Getting the survey gear installed was the easier part, it's calibration that will take time. Much of this process is unfamiliar to me, as I don't deal with navigational data often. The systems install has gone well thus far, and we're hoping to have her ready to sail in a day or two. I have a team that you can work with on calibrations, as they are the software experts, and I am mostly a mechanical minded person. Writing the software for this kind of stuff is a little out of my scope....

She's a lovely ship though! And in such good shape! You didn't even get her shot up on the way home! Half of these systems nearly installed themselves. She's got so much more room than a starfighter...

I hope you like the modifications, and that the stars guide your way!


Engineer
Asano Aika



RE: To:Asano Aika - Subject: Project Harukana Shiryoku - Soladiirn - 08-04-2020



ID: Nakai Hana
Encryption: Red Lily
Recipient: Asano Aika
CC: Yamada Mariko
Subject: Harukana Shiryoku




My crew and I can handle the calibrations. It is not unfamiliar to most of us from before joining the Gen'an. Have we been successful in obtaining the means to build the jump drive module? I believe the intention is for the Kiyomizu to be equipped with one as well in case we need to return to Kinkaku-ji in a hurry.

I would also feel safer if we were able to preserve space for a hangar bay with repair facilities as well. As capable as the Kiyomizu is, her anti-fighter/bomber capabilities are sadly lacking.


Navigator
Nakai Hana



RE: To:Asano Aika - Subject: Project Harukana Shiryoku - Megaera - 08-04-2020



ID: Yamada Mariko
Encryption: Blue Lily
Recipient: Nakai Hana, Asano Aika
CC: None
Subject: Yugami Drive




Konnichiwa Sisters,

It is good to hear the progress on the Kiyomizu Jingu. We are indeed capable of creating the drive you requested. Currently we constructed only one of the Yugami Drives, which is integrated into the Ise Jingu. I have relayed the request to construct a second one for the Kiyomizu Jingu to Kinkaku-ji's factory. It has been approved.

A hangar bay, or even two would be a necessity for the deep space exploration we will be attempting. The fighters need a place to restock.


Lieutenant
Yamada Mariko