+- Discovery Gaming Community (https://discoverygc.com/forums)
+-- Forum: Discovery Development (https://discoverygc.com/forums/forumdisplay.php?fid=7)
+--- Forum: Discovery Mod General Discussion (https://discoverygc.com/forums/forumdisplay.php?fid=37)
+---- Forum: Discovery Mod Bug Reports (https://discoverygc.com/forums/forumdisplay.php?fid=573)
+----- Forum: Unfixable (https://discoverygc.com/forums/forumdisplay.php?fid=692)
+----- Thread: [Coding/Systems/PVE Missions] Cannot Complete "Capture Prisoner" Mission (/showthread.php?tid=200251)
[Coding/Systems/PVE Missions] Cannot Complete "Capture Prisoner" Mission - a7om - 11-05-2023
Type: PVE Missions
Bug: During a "Capture Prisoner" mission, the countdown to return to the battle would initiate on the way back to base after destroying the target and tractoring the escape pod.
Reproduction Steps:
- Step 1 : Destroy mission target's vessel while both you and the target are out of bounds
- Step 2 : While still out of bounds, tractor in the target's escape pod
- Step 3 : Return to the mission area to stop the "return to battle" countdown
Step3a: Mission waypoint goes away and origin-base becomes the priority target
- Step 4 : Attempt to return to base
- Step 5 : Countdown reinitiates upon leaving the mission boundaries where the waypoint once laid. "Objective 1" becomes return to battle, "Objective 2" becomes Return to [base].
Additional Information: I did not kill all of the enemies; the mission did not require it and they were not showing up as priority targets.
Relevant Pictures: https://imgur.com/a/NCFoLt5
RE: [PVE Missions] Cannot Complete "Capture Prisoner" Mission - Alex. - 11-06-2023
I fear this one may lay in the 'Unfixable' subforum as it sounds like a game engine bug probably beyond our ability to do anything about