Discovery Gaming Community
Corsair signatures - Printable Version

+- Discovery Gaming Community (https://discoverygc.com/forums)
+-- Forum: The Community (https://discoverygc.com/forums/forumdisplay.php?fid=4)
+--- Forum: Media Center (https://discoverygc.com/forums/forumdisplay.php?fid=18)
+--- Thread: Corsair signatures (/showthread.php?tid=37994)

Corsair signatures - ProfGiggles - 04-06-2010

So i've made these. I don't have a price, you can have them for free if you want to, but donations is accepted ofcourse.:)
Feel free to suggest any changes to one you're interested in.

[Image: CorsairSignature1.png]

[Image: CorsairSignature2.png]

[Image: CorsairSignature3.png]

Corsair signatures - HurricaneX - 04-07-2010

Hey these are pretty good. Sorry I dont need one but they are good =)

Corsair signatures - DartStriker - 04-07-2010

I would drop the bevel on all of them. Looks corny. Good start but, I would like to offer some advice.

I suppose those signatures with the jagged edges are supposed to be torn, right? Us a small brush, with more lines on it. Go through with that and just nip away at the edges. Take another brush smaller than that one and pick away at those areas again. Once finished use the burn tool, and burn around the edges. Would give you a much nicer effect.

On the third one, I would suggest making the outline using the polygonal lasso tool. Select your starting area on your image and hold shift, it will conform any angle you make to 90 and 45 degrees. So it looks more uniform.

Here is a quick mock up I did, showing both examples I mentioned.

[Image: yournmae.png]

Corsair signatures - Szerano - 04-07-2010

Can you make an anti-corsair one plox? :3

Corsair signatures - ProfGiggles - 04-07-2010

' Wrote:I would drop the bevel on all of them. Looks corny. Good start but, I would like to offer some advice.

I suppose those signatures with the jagged edges are supposed to be torn, right? Us a small brush, with more lines on it. Go through with that and just nip away at the edges. Take another brush smaller than that one and pick away at those areas again. Once finished use the burn tool, and burn around the edges. Would give you a much nicer effect.

On the third one, I would suggest making the outline using the polygonal lasso tool. Select your starting area on your image and hold shift, it will conform any angle you make to 90 and 45 degrees. So it looks more uniform.

Here is a quick mock up I did, showing both examples I mentioned.

[Image: yournmae.png]

Thanks for the advice. That will give me something new to experiment with.:)

Corsair signatures - Varok - 04-07-2010

I wish I were a corsair now:laugh:
All sigs look very nice. Gracias!

Corsair signatures - Szerano - 04-11-2010

[Image: DerilosSignature1alt.png]

Still lovin' this sig Thanks again again Leon ^_^

Corsair signatures - Guest - 04-11-2010

Quote:[Image: BenitezSignature2.png]

Is it a coincidence that this looks so much like a certain sig made for Ximen a while back?
Edit: Ah well, whatever... The shape was pretty arbitrary then, so there's no reason for me to whine about it. Carry on.

Corsair signatures - ProfGiggles - 04-11-2010

' Wrote:Is it a coincidence that this looks so much like a certain sig made for Ximen a while back?
Edit: Ah well, whatever... The shape was pretty arbitrary then, so there's no reason for me to whine about it. Carry on.
After checking your sig thread I see what you mean hehe. Oops :unsure: