+- Discovery Gaming Community (https://discoverygc.com/forums)
+-- Forum: Discovery Development (https://discoverygc.com/forums/forumdisplay.php?fid=7)
+--- Forum: Discovery Developers Forum (https://discoverygc.com/forums/forumdisplay.php?fid=183)
+---- Forum: Discovery Unofficial Development (https://discoverygc.com/forums/forumdisplay.php?fid=389)
+----- Forum: Discovery Mod Content Submissions (https://discoverygc.com/forums/forumdisplay.php?fid=33)
+----- Thread: Submitting new Liberty Carrier (/showthread.php?tid=40288)
Submitting new Liberty Carrier - Seth Karlo - 05-18-2010
CMP file:
http://www.alphaomega.x10hosting.com/files/providence.cmp
MAT file:
http://www.alphaomega.x10hosting.com/files/providence.mat
SUR file:
http://www.alphaomega.x10hosting.com/files/providence.sur
I used a resized Liberty Dread file, and it uses a slightly modified Liberty Dread texture which I did. The model is Xings.
Pictures:
http://i130.photobucket.com/albums/p272/Se.../screen1263.jpg
http://i130.photobucket.com/albums/p272/Se...LibCarrier1.jpg
-Seth
[font=Times New Roman][color=#F96807]The images were too big so I changed them to links for you. They need to be less then 700px wide please - Widow.
Submitting new Liberty Carrier - Ebon - 05-18-2010
Just epic ?
Very similar to dread, but I love dread look also hehe
Submitting new Liberty Carrier - Death.RunningVerminator - 05-18-2010
Looks good, but that ship is completely unfair to bombers.
Submitting new Liberty Carrier - Linkus - 05-18-2010
Seth mate, that sur file is horrible.
You add on roughly 50% extra to the ship's height with it.
Do the sur splicing tutorial that Gurjiv put up. It shouldn't take longer than an hour or two and you can have a perfect sur file for it instead of..this.
If you don't want to do that, a simple cube sur file is better than the currrent one, all it would add would be a small amount to the engines at the bottom and the gap between the hatchet at the front.
Submitting new Liberty Carrier - Seth Karlo - 05-18-2010
It looks fine in HardCMP... hence why I used it.
If it desperately needs a custom job I can do one...
Submitting new Liberty Carrier - Linkus - 05-18-2010
![[Image: shipg.jpg]](http://img709.imageshack.us/img709/4866/shipg.jpg)
I wouldn't call that fine:P
It actually makes no sense to have the highlighted area, ought to just have a flat bottom on the sur instead.
At least squish the highlighted area a bit plox.
Submitting new Liberty Carrier - Seth Karlo - 05-18-2010
Bah, okok.
I'll go make a custom one now.
-Seth
Submitting new Liberty Carrier - Seth Karlo - 05-18-2010
Your two options:
I'm not sure if the bubble bit counts...will require ingame testing when I have the time (Now have to go revise):
1. http://www.alphaomega.x10hosting.com/files/Option1.jpg
2. http://www.alphaomega.x10hosting.com/files/Option2.jpg
-Seth
Submitting new Liberty Carrier - Irra - 05-18-2010
Isn't there already one like this one, almost same, with two engines and no holes in hull?
Submitting new Liberty Carrier - Linkus - 05-18-2010
Option 2, the bottom fin isn't that important compared to how much space it takes up elsewhere.
Otherwise just go for a more tight fitting one with more groups.
Oh and option 2 could do with some optimisation, the engine part isn't completely covered when it would be easy to.