Perfect, you are doing quite a good job. Well, till Verac arrives I will start with the wiring. It should go rather quickly, we will see. Cortana takes a few steps back and grabs some cables and wires. She quickly starts to fiddle the cabels through the ship. After a short while Verac was comming down in the elevator. Ah, Cortana you are already working again? It is always the same with you. I'll asume I can start to work on the engine. Verac quickly grabs a small chair and sits down next to the engine block. He then grabs the old fuel hose and starts to dismount it from the rest of the engine.
A few hours later. Well, the wiring is done. Now we have to connect everything and put in the new parts like the mainboard and the scanner. Once we managed to connect everything we will test the systems to see if everything works and once Verac is done with fixing the engine we will test fire it too. By the way how is it looking Verac? Verac looking slightly exhausted stands up and lights a cigar. Well, I'm almost done over here. We exchanged the fuel hose and replaced the controling hardware. We also exchanged some of the plating around the thrusters itself. I just hope it will work once we fire it up.