Commune R&D - Project Argus

[Cortana Clark]

Terminus Research & Development Laboratories

---

Entry ID: Cortana Clark

---

Category: Study

---

Case: Commune Weaponry Development - Project “Argus”

---

Encryption: Saturn Delta-2341

---

Scientific Report – Log 2

So I decided to make video logs from now on because it's easier, in my opinion, to follow the steps, for my following brothers and sisters.

Alright, time to report. Today was a pretty successful day. My Brother and a Contractor made the delivery after that I have started my work.

The first step was to do these calculations. It was kind of a pain at the first try, but after the second try, it worked fine.

*She takes a cigarette out of her pack and lights it up while she looks slightly pleased*

The function of these pipes will be a lot easier than I first thought. After the calculations, the realization came that the most challenging part will be the creation of the pipes because I hadn't much experience until now. The pipes will work very simple, the heat that will be produced from the first shot will be sucked into the pipe of course as hot as possible. After that, the heat will be microwaved once again to create a new plasma.

*She takes a deep inhale from her cigarette and flips the ash of*

After that, the furnace got prepared to a max heat of 1'100°C to melt the copper. My first attempt wasn't really good because it had some weak points, the second try also wasn't how it should have been. After various trials with the copper, I was able to create it how it should be like on the blueprint. The copper is an excellent handling metal once you get used to it but, because of the low melting point, I'm not sure if this will hold.

*she stands up and goes to the fridge and takes a drink out*

The Heat Sink was able to withstand much higher temperatures in comparison to the copper at a point of 2'500°C. What also was interesting is that the Heat Sink didn't melt as expected, while it was under the high heat it broke apart before it completely melted. It concerns me a bit that it broke under the high heat, but I need to test it anyway.

Now that the Pipes are ready, I will develop a device that sucks the heat into the generator so that this will work properly. I will also do some tests first before the pipes, and the weapon gets welded together.

Cortana Out.

*She now looks more serious before the Log ends*

---