Discovery Player Base Guide

[Rantari]

We are currently trying to make sure our numbers are correct before updating the guide. It’ll be fixed soon.

[Reno]

Hello

Question about core 1 base

My buildmod list reads:

1: shieldgenerator module type 1
2: cargo storage
3: cargo storage

How do i upgrade to a core 2 base?

---

[Kauket]

You actually need to build a core upgrade module, however the blueprint is obtained via a request.


https://discoverygc.com/forums/forumdisplay.php?fid=167

---

[Reno]

You actually need to build a core upgrade module, however the blueprint is obtained via a request.


https://discoverygc.com/forums/forumdisplay.php?fid=167

Thx,

I understand the request for the blueprint.

I have read the playerbase guide but i want to start the upgrade.

Can you show me the command?

---

[Reno]

The core 1 base has 3 modules.
Al 3 are in use (see previous post)

Can i upgrade to core 2 or do i have to empty/destroy a module?

---

[Bannorn]

The core 1 base has 3 modules.
Al 3 are in use (see previous post)

Can i upgrade to core 2 or do i have to empty/destroy a module?

Core upgrades use up a module slot. So make sure you have at least 1 empty module to construct it. So for example, for a Core 1 base a common build order for your three slots is:
- Shield Module
- Cargo Module
- Core Upgrade.

In your case to upgrade you will need to use the destroy module command for one of them, build your core upgrade, and then rebuild the module you wanted.


EDIT: just saw your question about the command as well. All the commands can be found here: https://discoverygc.com/wiki/Server_Commands, as well as in game via help commands.

---

---

Remove the SNAC for good

[08.07.2019 03:20:17] =CR=Zulu: Situations like these makes me wish they left me behind in Crayter.

[Reno]

The core 1 base has 3 modules.
Al 3 are in use (see previous post)

Can i upgrade to core 2 or do i have to empty/destroy a module?

Core upgrades use up a module slot. So make sure you have at least 1 empty module to construct it. So for example, for a Core 1 base a common build order for your three slots is:
- Shield Module
- Cargo Module
- Core Upgrade.

In your case to upgrade you will need to use the destroy module command for one of them, build your core upgrade, and then rebuild the module


EDIT: just saw your question about the command as well. All the commands can be found here: https://discoverygc.com/wiki/Server_Commands, as well as in game via help commands.

Thanks Bannorn , that clears it up.

Reno

---

[LaWey]

About PoB weapon platforms. If FLHook nohow dont change those on server, should be so:

Type 1:

• 2x pbwp_med_heavygun: hull - 40000; speed - 1000; range - 2750; rps - 0.5
  
• 2x pbwp_med_pulse: hull- 2000; energy - 35000; speed - 1000; range - 2750; rps - 0.25
  
• 6x pbwp_med_lightgun: hull 4000; speed - 1600; range - 2560; rps - 1

---

Type 2:

• 2x pbwp_long_heavygun: hull - 50000; speed - 650; range - 3900; rps - 1
  
• 4x pbwp_long_pulse: hull - 2000; energy - 70000; speed - 800; range - 4000; rps - 0.25

---

Type3:

• 2x pbwp_short_heavygun: hull - 140000; speed - 2000; range - 1500; rps - 0.1
  
• 8x pbwp_short_lightgun: hull - 2000; speed - 2600; range - 1599; rps - 2

[Connor]

https://discoverygc.com/forums/showthrea...pid1021226

We have some broken images in this thread however I do not have a base I can use to aquire these images. Can someone from the community provide images showing the output of the following commands please?

/base buildmod

/base buildmod list

---

[Charo]

https://discoverygc.com/forums/showthrea...pid1021226

We have some broken images in this thread however I do not have a base I can use to aquire these images. Can someone from the community provide images showing the output of the following commands please?

/base buildmod

/base buildmod list

I gotchu

Buildmod: https://i.imgur.com/VwRArpu.png

List: https://i.imgur.com/9F1Hjjx.png

---